Roofers: Setback Patterns to Speed Up Installation

If you're a roofer installing Bellaforté Shake tiles, you are familiar with the "false break" that gives the synthetic shake tile the appearance of being several smaller pieces to resemble the look of real wood shake. You may have scratched your head a time or two if, when installing this product, the false break lines up vertically.

Not to worry ... we have a solution.

Our experienced Technical Service Manager at DaVinci Roofscapes, Tyler Storfa, has handled this question several times in the field. His recommendation is to use a setback pattern that can really speed up installation of Bellaforté Shake tiles.

shake roofing materials"Bellaforté is installed from left to right," says Storfa. "The four-course repeating pattern runs up the left hand side rake. This can be cut on the ground and taken and applied on the roof."

Storfa says the first course (full course) is a full piece of field tile with the water channel or gutter removed. The second course (B course) is cut at approximately the letter "B" in the imprinted word "Bellaforté" on the tile (located in the upper left hand side of the tile) and then laid close to the edge of the tile. For the third course, repeat steps of first course. And the Fourth course (E course), take a new shake tile and cut at the last "E" in the word "Bellaforté at the top of every tile," discarding any waste product to the left of the letter "E." No "B" and "E" courses can be together without a "full" in between

Want an easy way to remember this installation pattern? Try this mantra: Full (with gutter removed), B, Full (with gutter removed), E. Yes, that's it: Full, B, Full, E!

Have other questions about installing Bellaforté products? See Bellaforte by DaVinci – Engineered to Withstand High Winds and DaVinci Solid Accessory Tiles.

 


Leave a comment





Captcha